Aneroid set hand, brass, centre to point 3 1/8"
|
 |
Aneroid set hand, centre to point 3 1/2" (will cut to 3")
|
|
Aneroid hand, blued steel, centre to point 3 1/8"
These hands do not fit our movements, as with all old barometers there was no standard, we are lucky to have hands that can suit old barometer designs, but can not get ones that are designed for the movements generally unless we order 1000 of each! These hands are old ones and have some surface rust, normally we black paint them but if you preffer youcan carefully clean and re-blue them the Aneroid hands require adjusting to fit which is up to you the restorer.
|
|
Aneroid style light weight indicating hand with centre to fit large movement (1003100) centre to point 3 1/4"
Has small centre spindle not suitable for most old movements which tend to be larger.
|
|
|
|
Set hand for aneroids to match 1001440/1450
is brass effect stainless steel on one side for riviting on 1001470 knob.
|
|
Centre set hand knob for aneroid barometer, rivet fit to set hand, use felt or paper washer between knob and glass
|
|
Pocket barometer hand, blued brass, centre to point 26mm, open rounded end, no centre provided
|
|
Pocket barometer hand, as above, cresent end
|
|
Aneroid hand, black arrow point, centre to point 2 1/2"
These hands do not fit our movements, as with all old barometers there was no standard, we are lucky to have hands that can suit old barometer designs, but can not get ones that are designed for the movements generally unless we order 1000 or each! Aneroids hands require adjusting to fit which is up to you the restorer.
|
|
Aneroid instrument hand, centre to point 2 1/16"
This is an oldish style instrument hand, seldom if ever seen on domestic barometers.
These hands do not fit our movements, as with all old barometers there was no standard, we are lucky to have hands that can suit old barometer designs, but can not get ones that are designed for the movements generally unless we order 1000 or each! Aneroids hands require adjusting to fit which is up to you the restorer.
|
|
Aneroid hand, black arrow point, centre to point 1 7/8"
These hands do not fit our movements, as with all old barometers there was no standard, we are lucky to have hands that can suit old barometer designs, but can not get ones that are designed for the movements generally unless we order 1000 or each! Aneroids hands require adjusting to fit which is up to you the restorer.
|
|
Aneroid hand, black arrow point, centre to point 1 9/16"
These hands do not fit our movements, as with all old barometers there was no standard, we are lucky to have hands that can suit old barometer designs, but can not get ones that are designed for the movements generally unless we order 1000 or each! Aneroids hands require adjusting to fit which is up to you the restorer.
|
|
Aneroid set hand, brass, centre to point 2 1/2"
|
|
Aneroid set hand, brass, centre to point 1 7/8"
|
|
Aneroid centre knob, medium, 3/8" o/d
|
|
Aneroid set hand, brass, centre to point 1 9/16"
|
|
