Mirrors, frames, glasses and tube loops

Spare Parts  |  Mirrors, frames, glasses and tube loops

Fine turned wood mirror frame to fit holes 3 3/8

Fine turned wood mirror frame to fit holes 3 3/8" to 4 1/4" in 1/8"s

Ref: 1001600


Price: £27.46 (Excluding VAT at 17.5%)

Size

Fine turned wood mirror frame to fit holes 3 3/8" to 4 1/4" in 1/8"s
Remember these mirros are made to fit theholes size stated so maybe a little smaller to allow this, a small amount of packing maybe required to fit tightly and most holes are not round on old barometers but roughly cut.

Brass cast mirror frame usually used on rosewood barometers circa 1860 onwards. max o/d 4

Brass cast mirror frame usually used on rosewood barometers circa 1860 onwards. max o/d 4"

Ref: 1001610


Price: £38.30 (Excluding VAT at 17.5%)

Brass cast mirror frame usually used on rosewood barometers circa 1860 onwards. max o/d 4"

Convex mirror to suit cast brass bezel

Convex mirror to suit cast brass bezel

Ref: 1001620


Price: £12.57 (Excluding VAT at 17.5%)

Suits our brass mirror frame.

Convex mirrors from 3

Convex mirrors from 3" to 3 7/8" diameter

Ref: 1001630


Price: £12.57 (Excluding VAT at 17.5%)

Size

We will need to be told the size required, best to measure the aperture at back of frame where mirror fits. Inform us if the size you state is frame size when we will supply slightly smaller or actually size preffered.
Mirror sizes can vary slightly so if critical we need to know the tollerance. (i.e. plus or minus 2mm)
Mirrors can have some small specks and marks.

Convex glasses from 7 7/8

Convex glasses from 7 7/8" to 8 1/4" diameter

Ref: 1001700


Price: £14.74 (Excluding VAT at 17.5%)

Size

These convex glasses are bent in our glass room - thye are good for replacement of old barometer glasses, each one does vary slightly in diameter and height so if critical contact us. They are designed to be fitted with plater of paris from teh back of teh bezel so edges are rough as cut and will not snap in the front - that type requires making specially.

Convex glasses from 9 7/8

Convex glasses from 9 7/8" to 10 3/8" diameter

Ref: 1001710


Price: £18.96 (Excluding VAT at 17.5%)

Size

These convex glasses are bent in our glass room - thye are good for replacement of old barometer glasses, each one does vary slightly in diameter and height so if critical contact us. They are designed to be fitted with plater of paris from teh back of teh bezel so edges are rough as cut and will not snap in the front - that type requires making specially.

Convex glasses 12

Convex glasses 12" diameter

Ref: 1001720

We can bend up to approx 14 inch diameter glasses to order.
Please contact us for your requirements.

Round flat glasses with centre hole drilled (5mm). From 7 3/4

Round flat glasses with centre hole drilled (5mm). From 7 3/4" to 8 3/8" diameter

Ref: 1001730


Price: £14.40 (Excluding VAT at 17.5%)

Round flat glasses with centre hole drilled (5mm). From 7 3/4" to 8 3/8" diameter designed for mercury wheel barometers and to be plaster of paris fitted from reverse of bezel. Not for aneroid barometers which generally require a thicker glass bevelled and snap fitted from the front - which we make - please contact us by e-mail with ONE picture of the bezell you are needing a glass for. Do not send us anything untill we issue a parcel number.

12mm tube clips 1 3/16

12mm tube clips 1 3/16" x 5/16"

Ref: 1001980


Price: £1.91 (Excluding VAT at 17.5%)


Fleur-de-lis decorative loop mount, 5/8

Fleur-de-lis decorative loop mount, 5/8" wide x 11/16" long

Ref: 1001981


Price: £10.29 (Excluding VAT at 17.5%)


Large cast brass tube cover fits 5/8

Large cast brass tube cover fits 5/8" tube 2 3/8" x 5/8"

Ref: 1002060


Price: £9.57 (Excluding VAT at 17.5%)


Spare Parts  |  Mirrors, frames, glasses and tube loops